Capabilities
Up to 75kg
We currently produce a wide range of steel materials such as Carbon, Low alloy, High Tensile, Tool, Stainless, Duplex, Super Duplex and Exotic.
We also produce castings in Irons such as SG and High Chrome.
Automotive
General Engineering
Manufacturing
Oil and Gas
Power Generation
Production
Pumps
Special Projects
Automotive
General Engineering
Manufacturing
Oil and Gas
Power Generation
Production
Pumps
Special Projects
Materials
Material Expertise: 170+ grades of steel
| Material Type | Applications |
|---|---|
|
Carbon Steel |
General engineering applications and for use in specific oil and gas explorations and production. Upstream and downstream processes and both sour and sweet environments. |
|
Alloy Steel |
Providing high strength, low temperature impact properties and high temperature creep resistance. |
|
High Alloy Steel |
Imparting high strength for critical applications. |
|
Austenitic Stainless Steels |
A range of austenitic grades imparting resistance to a wide range of corrosive environments. |
|
Martensitic Stainless Steels |
A range of martensitic grades imparting resistance to cavitation at relatively high temperatures including steam turbines and excellent toughness especially at low temperatures. |
|
Duplex and Super Duplex Stainless Steels |
A range of duplex and super duplex stainless steel grades for high strength combined with corrosion resistance; particularly resistant to sulphide stress corrosion cracking and localised attack (pitting/crevice). |
|
Super Austenitic Stainless
Steels |
Providing resistance to high corrosion environments in sea water, high chloride and extreme sour service applications and erosion corrosion. |
|
Nickel-based Super Alloys |
Imparting good mechanical strength and impact resistance. high resistance to creep at high temperatures. Excellent corrosion and oxidation resistance. |
Grey Iron high grade for pump applications.
Tolerances
Dimensionally accurate to tolerance specification ISO 8062 Grade CT4 – CT6.
Laboratory
Every melt is checked using a SPECTROMAXx spectrometer. Mechanical and Corrosion testing is sub-contracted.
Size/Weight Range
We currently produce castings up to a size of approx. 750mm in Diameter and up to 80 Kgs casting weight.
Machining Allowances
Machining allowances are dependent on the size of the casting but in most cases would be a maximum of 3mm.
A surface finish of N8 to N9.
Form of Supply
We currently offer castings supplied in the un-machined, pre machined or fully machined condition.
We have several machine shops within the group which we use for machining our components.
Starting with a Concept?
Providing solutions to meet our customer requirements
Bonds Precision Castings can liaise with clients on casting design and development by electronic interaction, significantly speeding up casting design at the concept stage.
Proud Suppliers to
